High Self-Priming Rubber Rotor Sludge Lobe Pumps Horizontal Mounting
Accuvon rotary lobe pumps
Accuvon rotary lobe pumps convey different fluids, whether with low or high viscosity, containing solids or pure, chemically aggressive or up to a temperature of 200°C. Due to the large selection of different materials, rotors and sealing systems, the pumps can be customized.
Our pumps are available in the series of 4 series with 16 different sizes and flow rates of 1 to 3200 m³/h – high performance with smallest footprint.
Function
Due to the unique separation between the pump and gear chamber, the ACCUVON lobe pump offer you maximum operational safety. This means that no penetration of the medium into the bearing housing is possible in the case of a product leak. In addition, the innovative design allows you to inspect the mechanical seals visually. This enables you to react at an early stage if necessary. Thanks to the function of the rotary lobe pumps, you can also safely convey both low and high viscosity media. Due to the significant free ball passage and the low speeds, the positive displacement pumps are insensitive to blockages, clogging and foreign bodies. Varying solids contents have just as little influence on the flow rate as pressure changes. This enables continuous and powerful pumping.
Specifications:
| Description | Rubber lobe pumps |
| Rotor | Rubber rotor |
| Seal | Double mechanical seal |
| Axial and radial casing protection | High-strength steel , resistant to wear |
| Drive | Electric motor |
| Material of pump | Carbon steel |
| Pressure | 0-1.2 mpa |
| Flow | 10 m³/h |
| Power | 11-55 / KW |
| Work efficiency | Up to 85% |
| Rate of flow | 0.392 l/rev |
| Self - priming | Up to 9.5m vertical / 30m horizontal |
| Medium | High-corrosive / high-viscous |
| Custom printing | Acceptable |
Construction
1. The quick-release cover
Access to all wetted parts by simply loosening four ring nuts – maintenance without removal of pipe or drive systems.
2. The rotors
Large selection of high-quality rotors for almost pulsation-free pumping of the medium.
3. The casing protection
Depending on its size, the BLUEline pump is available with and completely without protection plates and liners. When pumping abrasive media containing solids, the protection plates and liners protect the pump casing from wear and can be replaced in a matter of minutes.
4. The intermediate chamberand shaft seal
The large-volume quench chamber is oil-filled and ensures the highest degree of safety. The ideal mechanical seal is selected depending on the medium.
5. The carrier and timing gear
The high-quality and maintenancefree carrier and timing gear guarantees a smooth and even operation of the rotors. The result is a long service life of the pump.
Advantages
• Steel rotors with screw profile for low pulsation
• Pump is permanently technically tight
• Pressure-resistant
• Almost pulsation-free pumping
• Pumping of highly viscous media
• Resistant to solids
• High efficiency with pressures of up to 25 bar
• Pump speed can be adapted to the viscosity of the medium
• Short-term dry-run capability
• Self-priming
• Flexible flow rate
• Short-term dry-run capability
• Pumping of highly viscous media
• Pump made of stainless steel
• Quick emptying of tank
• Chemically highly resistant materials
• Small footprint
• Reversible
• Variable speeds
• Changing the rotors in a few minutes
Testing Photo
Product Tags:
|
|
High Self - Priming Rubber Rotor Sludge Lobe Pumps Horizontal Mounting Images
|
